Quick Answer: How Do I Find An Artesian Well On My Property?

Can I dig a well anywhere?

You probably can drill your own well on your property.

You, of course, would have to contact your local building department to see if there are any regulations that must be followed.

Some states and cities may still charge you for the water that’s pulled from your land, but that’s a debate for another day..

How much does it cost to dig an artesian well?

Artesian Well Cost. An artesian well costs $35 to $85 per foot or $5,000 to $15,000 for drilling and casing to an average depth of 150 to 450 feet to hit an aquifer.

Does a deeper wells mean better water?

Water quality in a deep well usually changes more slowly than in a shallow well. That’s because groundwater does some mixing as it moves through the aquifer. A spill a mile away from your deep well in the Basin and Range aquifer might be substantially diluted with clean aquifer water before it gets to your well.

How do I find the well on my property?

Look for locations where a well would be likely to be placed: continue by looking in the building for a sketch of well location – often left in a basement or crawl area over or close to the pressure tank and pump/controls, or sometimes even sketched on a ceiling joist or wall where the well pipe exits the building.

How deep is a artesian well?

These wells range from 50 to 125 feet deep in the central and southern portions of the district, while they range from 50 to 300 feet deep in the northeastern portion of the district. When the water levels in the well drop to 25 feet or more below land surface, a centrifugal pump is no longer adequate.

How does an artesian well work?

An artesian well is simply a well that doesn’t require a pump to bring water to the surface; this occurs when there is enough pressure in the aquifer. The pressure forces the water to the surface without any sort of assistance.

Can artesian wells dry up?

Artesian wells are also less likely to go dry during the dry seasons, as opposed to surface wells, due to water bearing fractures that produce a steady flow of water year round.

How do I know if I have a deep or shallow well?

If it is small diameter, such as 1-1/4” PVC, that would indicate it is a shallow “well point” as they are called. If it is 2″ or above, it very well could be a deep well. Larger casings may also be shallow wells. Some of the largest diameter wells are very shallow (bored wells).

Is water from an artesian well safe to drink?

Florida and Georgia are great examples of how artesian well water might not be safe to drink. … Artesian water still runs the same risk of exposure to many contaminants found in all spring water, well water, tap water, and bottled water.

How do I find the water table in my area?

How to Find My Water TableCall your local County Extension Office. It may have statistics for the average annual water table level in your area. … Look online. Check out the website for your local Water Resources Office. … Dig. This is the most reliable way to find the water table level on your land.

Can you drink artesian water?

As such, the water has a rich concentration of natural minerals. It is also considered to be free from contaminants. With this, many people choose the artesian water. This is true when they decide on safe and healthy bottled water for their family.

How can you tell if you have an artesian well?

“Artesian” means that the water level rises above the depth of completion. … If the water level in the well is above the completion zone but below the ground, it is a non-flowing artesian well. If the pressure level (head) is above ground, it is a flowing artesian well.

How do I know what type of well I have?

You may be able to determine the type of well you have by looking at the outer casing and cover of the well. According to the United States Environmental Protection Agency (EPA), there are three basic types of private drinking wells dug, drilled, and driven .

Do all wells have a pump?

Each home has its own well from which to draw water. More than that, each home has its own electromechanical system for getting the water from the well to the house. At the heart of each system is a pump, and the most common types are jet pumps and submersible pumps.

How do I find the water to dig my well?

Although the digging of the well is usually done by professionals, finding the water supply can be done by just about anyone. Study your property to see how the land flows. Water will usually pool and puddle in depressions and valleys on the property, that are closer to the underground water table.

How long do artesian wells last?

10-15 yearsThe average pump and pressure tank last 10-15 years, but it is not uncommon to hear of 20-year-old pumps.

Do artesian wells need a pump?

An artesian well is a water well that doesn’t require a pump to bring water to the surface; this occurs when there is enough pressure in the aquifer.

What are the 3 types of wells?

There are three types of private drinking water wells.Dug/Bored wells are holes in the ground dug by shovel or backhoe. … Driven wells are constructed by driving pipe into the ground. … Drilled wells are constructed by percussion or rotary-drilling machines.