Quick Answer: How Much Should It Cost To Replace A Toilet?

How often should you replace your toilet?

Although some plumbers would say a toilet could last up to 50 years, a federal law actually states that any toilets built before 1994 that holds more than 1.6 gallons per flush must get replaced.

So there you have it..

Is replacing a toilet difficult?

Replacing a toilet is a major project, but it is not as difficult as might be imagined. The hardest tasks usually are selecting a new toilet and removing the old one. Choose a new toilet carefully. Ask the dealer whether existing plumbing will have to be modified, which is a job for a licensed plumber.

How much does Home Depot charge to install a toilet?

How much does Home Depot charge for toilet installation? Home Depot does not hire installers; they subcontract installation to local plumbers and electricians, but they advertise on their site that toilet installation costs $269.

Does Home Depot install toilets?

Whether you purchase a toilet from a Home Depot store or on homedepot.com, we can install it for you. Just visit the Service Desk or ask an associate at your local store about our toilet installation service. … Please note that a toilet is not included in the price of installation.

What causes a wax ring to fail?

Wax rings also provide a watertight seal that forces water and waste from the toilet directly into the drain. … If water accumulates or puddles around the base of the toilet, the wax ring may have failed. Any leaks can rot the floor or subfloor, so address them quickly.

Do you need a plumber to replace a toilet?

The short answer is YES YOU CAN. Replacing a toilet is an easy job for the average homeowner. It requires minimal basic tools and should only take up less than an hour of your time.

How long should it take a plumber to replace a toilet?

Our research team found that a plumber usually requires an hour or two to install a toilet. The process generally includes: Turning off and disconnecting the water. Repairing the shut-off valve if it’s not working properly.

Should you caulk around a toilet?

Caulk helps to keep the toilet secured to the floor. The bolts are really supposed to keep the toilet secure, but caulk helps. … Some people prefer to caulk all around the toilet and leave about a one-inch gap in the caulk at the back of the toilet to allow water to escape out in the event of a leak.

Should I upgrade my toilet?

Like with all remodels, keep the toilet upgrade proportionate to your home’s market value, advises appraisal expert Leslie Sellers. You don’t want to spend thousands of dollars on a fancy toilet and bidet in a starter home. On a Budget: Unless your toilet is falling apart, you don’t need to replace it.

Do all toilets fit the same?

The first step is to measure carefully to ensure that the toilet you purchase will fit in the same location as the old one. … If the rough-in measurement is not between 11 inches and 13 inches, a standard toilet will not fit the space, and you will need to look for a toilet designed for that specific rough-in distance.

How often should toilet wax ring be replaced?

It requires no maintenance and can last 30 or more years, often as long as the toilet itself. But sometimes wax rings can dry out, crumble, and fail prematurely. When that happens, they need to be replaced. The telltale sign of wax ring failure is water leaking out from around the base of the toilet.

Why is toilet rocking?

Toilets usually rock because they are not resting flush against the floor. Underneath the toilet base is a round toilet flange that connects the toilet to the drain pipe. If the flange is a little higher than the surrounding flooring, the toilet becomes raised slightly in the center, allowing it to rock to either side.

How much should a plumber charge to replace a toilet?

A plumber charges around $375 to replace a toilet. Most charge between $275 and $480. This includes the cost of removing and disposing of your old toilet. Note that the actual cost to replace a toilet depends on your location, the type of toilet and the difficulty of the installation.

How much does it cost to replace the inside of a toilet?

On average, it will cost from $45 to $197 to fix a toilet yourself or between $130 and $310 to have professional repairs done by a plumber. The average charge for a plumbing contractor is $72 to $82 per hour, which does not include parts or materials. Get free estimates from plumbers near you.

Can I replace a toilet myself?

Replacing or installing a new toilet isn’t as hard as it may sound. All you really need are a few hours of time and the right tools for the job. So, gather up your new toilet, replacement wax ring, rubber gloves, hacksaw, a putty knife, adjustable wrenches, plunger, a bucket and some old rags.

What is the lifespan of a toilet?

10-15 yearsOne of the most used fixtures in your home, the toilet, on average has a lifespan of 10-15 years. For being used as often as it is, the toilet can withstand a lot.

Are old toilets better than new ones?

The biggest difference between older toilets and the models available today is the amount of water they use. Toilets manufactured after 1992 need less than half as much water per use as many older units, while providing a better flush and new convenience features.

How long does the wax ring on a toilet last?

30 yearsThe wax keeps water from leaking as it passes from the toilet to the drain pipe. It also seals against foul sewer gas odors. A wax seal will often last the life of the toilet, 20 or 30 years, without needing to be changed. There are times, though, when the wax ring will need to be replaced.